Food & Beverage Processing
Interlube Corporation manufactures a complete line of food grade lubricants and cleaning compounds for equipment used in food processing, packaging, and related industries including canning, bottling, freezing, dairy operations, bakeries, grain handling and other agri-business, meat, poultry, and seafood processing, food service, textiles, cosmetics and personal care, as well as suppliers to these industries such as equipment, packaging, and material handling manufacturers.
Check out our complete list of NSF registered food grade products.
Scroll down to see a few of our products. We can custom design a product to meet your requirements. See the aerosol products section for additional products. Please contact us for additional information or to place an order.
Need assistance figuring out which product you need? Ask an expert!
Contact us at 513-531-1777
Here is a list of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
products are multi-purpose, synthetic, food grade lubricants specially formulated with very high levels of antioxidants to meet the most demanding requirements of the food processing and pharmaceutical industries. They are suitable for a wide range of general-purpose applications including today’s modern high pressure, high-speed hydraulic systems and air tool lubrication. They are formulated with a unique combination of anti-wear agents, mild EP agents, rust inhibitors, and oxidation inhibitors which pass the tough Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these synthetic food grade lubricants is superior to most non-food grade lubricants on the market today. These synthetic lubricants have many applications including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, air tool oils, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. The Cinnfluid AW+1 products are all USDA H1 rated (lubricants approved for incidental contact with food) and are suitable for food machinery applications where there might be the possibility of incidental contact with the food or its packaging materials.
products are multi-purpose, food grade lubricants, based on synthetic hydrocarbons, designed to give outstanding performance in heavy-duty industrial applications at very low and/or high temperatures. These products are especially designed for heavy-duty industrial applications involving high load conditions and extremely high operating temperatures. Their superior thermal and oxidation stabilities, coupled with outstanding anti-oxidants, far exceed the performance of conventional lubricants. Their naturally high viscosity indexes assure performance across a wide range of temperatures while their low inherent pour points assure performance at low temperatures unheard of with conventional petroleum lubricants. Cinnfluid GB +1 products maintain their performance benefits at conditions where most other products fail. They are available in many different viscosities grades to meet any need.
Cinnfluid HTC (155, 235, 310, 500, 750, 1200)
products are premium, food grade, synthetic compressor fluids designed to give outstanding performance in oil flooded rotary vane and rotary screw compressors. These products have exceptional thermal and oxidation stability, which results in reducing the formation of varnish, lacquer and sludge deposits. Its high viscosity index and low pour point are natural properties of the base synthetic fluid. This is a third generation product in the development of food grade compressor fluids and is designed for 3000-hour change intervals. The shear stability of these products and its outstanding oxidation stability result in significantly longer lubricant life with reduced downtime for maintenance.
are special, PTFE containing, synthetic, food grade, non-melt grease formulations, which are odorless and nearly colorless. Their synthetic formulations give them truly outstanding performance at high and low temperatures and extremely long service life. They have excellent EP, anti-wear, anti-rust, anti-oxidation, and adhesive properties. The synthetic base fluids, used in their formulations, have a very high viscosity index making them excellent greases for use over wide temperature ranges. Cinnguard Greases are available in most NLGI grades and in a wide variety of oil viscosities.
Cinn-Lube FG MPA
is an aerosol product. Is a food grade multi-purpose synthetic lubricant, specially suited for lubrication of chains, slides and bearings which require a lubricant with superior protection from rust, corrosion, oxidation and wear from high loads or high temperature conditions. It is suitable for high temperature ovens.
FG 1200 Synthetic Oven Chain & Bearing Lubricant
designed for use in high temperature ovens where a USDA H-1 lubricant is wanted or needed (acceptable for incidental food contact). It can be used in applications up to 240°C or 465°F. It offers excellent anti-wear performance and oxidation resistance.
FG 1200 II Synthetic Oven Chain & Bearing Lubricant
designed for use in high temperature ovens where a USDA H-1 lubricant is wanted or needed (acceptable for incidental food contact).
Fire Resistant Hydraulic Fluid 59D
is a synthetic hydraulic fluid designed for applications that require a hydraulic fluid with greater fire resistance than that offered by conventional mineral oils. It has much higher flash and fire points than conventional mineral oils and some synthetic materials. This product is especially designed for heavy-duty industrial applications operating at high pressures and over wide temperature ranges. It has outstanding thermal properties as well as superior anti-wear and rust & oxidation resistance. Other advantages of its synthetic formulation are its naturally high viscosity index, low volatility, shear stability and biodegradability. It meets USDA H-1 requirements.
Interlube’s Formula 017 is designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications.
is a high purity solvent with relatively high flash point (>160°F), which allows it to be used more safely than other lower flash solvents. This high flash point also makes for easier disposal of the spent solvent. In many situations, a licensed used oil recycler can recycle it (consult your federal, state, and local regulations). It is an excellent parts washer and degreaser as well as a general-purpose solvent. It loosens grease, oil, dirt, grime and sludge allowing for easy removal and cleanup. It also can be used as an ink solvent to clean up some types of ink in printing or ink plants. It is truly a multi-purpose cleaner/degreaser.
Formula 1103M Metal Safe Cleaner
is a low foam, multi purpose, powder cleaner for use in food processing and industrial plants that require a thorough cleaning yet metal safe product. It is mild to use, but highly effective in removing a broad range of difficult to remove soils, and gives rapid wetting, direct penetration and good emulsifying power on greasy and oily soils. Formula 1103M dissolves readily and contains no insoluble matter, and therefore, rinses easily and completely leaving no residue. It contains materials to hold hard water salts in solution and prevent buildup of scale on heating coils and tubes. Formula 1103M is not just safe on metals, it is non-corrosive, non-toxic, biodegradable and non-hazardous. It contains no caustics, chromates, nitrites, glycol ethers, phenols or other hazardous chemicals. It can be boiled without giving off irritating fumes. It meets USDA A2 as “a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices.”
Formula 1375 Heavy Duty Alkaline Cleaner
is a powder cleaner designed to remove heavy, baked on soils, carbonized deposits and other tough to remove residues in food, drug and beverage manufacturing and processing plants. Formula 1375 meets USDA A2, meaning it is “acceptable for use on in soak tanks or with steam or mechanical cleaning devices.” It is extremely effective on proteinacious soils and their residues. Formula 1375 is safe on iron, steel and stainless steel. It should not be used on aluminum, copper, brass, galvanized, tin or zinc.
Formula 2036 LF
is a fast acting, heavy-duty, low foaming, alkaline cleaner concentrate that can be used in steam and high-pressure hot water cleaning equipment as well as hot soaker tanks. It meets USDA A1 meaning it is “acceptable as a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices.” It can handle a wide variety of jobs where highly caustic material is required. The convenient liquid form allows for easier more rapid mixing and safer use. It is a quick, deep penetrating cleaning compound that dislodges heavy soils and grease rapidly. When followed by a steam or high-pressure rinse it leaves surfaces free of deposits and film. It licks the toughest jobs while saving both time and money.
Formula 2039 HF Alkaline Cleaner Concentrate
is a heavy duty, high foaming, and high alkaline, multi-purpose cleaner. It is especially suited for tough cleaning operations such as vegetable, meat, fish and poultry fats, starches, greases, oils, proteinaceous stains and other hard to remove deposits. This cleaner is specially designed for foam applications, but can be used for cleaning in place and steam or hot high pressure cleaning operations. The surfactants incorporated for foam generation and stabilization are very effective in wetting and emulsifying and greatly improve the ability of the alkaline cleaners and builders to penetrate and break down the greases, fats and other soils. This product is acceptable for use only in soak tanks or with steam or mechanical cleaning devices in all departments operating under the USDA’s Federal meat and poultry inspection programs ( meets USDA A2). This product is safe to be used on iron, stainless steel, copper, rubber and most plastics. However, it is not safe on aluminum, tin or galvanized.
Formula 2506 M Cleaner
is an economical, multi-purpose, liquid cleaner designed for use in many different types of applications including hand wiping, power spray cleaners, floor scrubbers, etc. It is USDA approved as A1, meaning it is “acceptable as a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices in all departments of official establishments operating under the Federal meat, poultry, shell egg grading and egg products inspection programs.”
Formula 2600 Multi-Purpose Cleaner
is a synthetic concentrate that cuts your inventory because it replaces all your special cleaners. It is easy and economical to use because you add and adjust the water level depending on the soil load. Formula 2600 quickly penetrates dirt, grease, grime, etc., and holds it in suspension for easy removal. It cleans everything from floors to greasy plant machinery. It is excellent for steam cleaning and safe on painted surfaces when diluted as directed. It can be applied by steam cleaner, spraying, brushing, mopping, or wiping. Rinse with water or wipe clean with damp cloth. On heavier soil, allow solution to soak and penetrate, but not to dry before rinsing or wiping clean.
Formula 2611 Cleaner Concentrate
is a versatile, multi-purpose liquid concentrate, formulated for hard surface cleaning. It meets USDA A1, meaning it is “acceptable as a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices in all departments of official establishments operating under the Federal meat, poultry, shell egg grading and egg products inspection programs.” It has the ability to penetrate the toughest soils, displace them from the surface, emulsify them and keep them from redepositing on the surface being cleaned. It has excellent wetting and sheeting action and non-streak rinsing to leave a clean sparkling appearance.
Graphite Chain Lube #146
is a solvent based chain lubricant specially designed for lubrication of high temperature oven chains of the type used on bakery ovens and similar applications. It is an updated and improved lubricant over the “old style” kerosene and graphite mixtures used for over fifty years in the baking industry. The premium grade graphite in Graphite Chain Lube #146 assures longer chain life, higher load carrying properties, and reduced energy costs. This product incorporates a special carrier fluid, which is much less hazardous to human health and the environment than the “old style” chain lubricants.
Heat Transfer Fluid 235
is a premium quality, synthetic, heat transfer fluid specially designed for sustained high temperature use in closed circulating systems equipped with expansion tanks. It offers exceptional resistance to oxidation at high temperatures, keeping sludging, varnishing, and carbon deposits to an absolute minimum. It has an operating temperature range well in excess of 600º F in closed systems and offers high thermal efficiency, extremely high flash and fire points, low viscosity for easy economical circulation, and extremely low volatility to reduce losses. Its unique synthetic hydrocarbon structure offers a high degree of resistance to breakdowns during high temperature service, which far exceeds that of both conventional heat transfer oils and other synthetic heat transfer fluids. Heat Transfer Fluid 235 not only offers exceptional heat transfer properties and long term anti-fouling and high temperature stability, but does so without the inherent environmental and human health exposure risks of many heat transfer fluids in the market. It is especially suited for high temperature heat transfer applications in systems for resins, plastics, asphalts, waxes, varnishes, and many other applications. It is USDA approved H1 and NSF Registered as HT1 meaning it is acceptable for incidental contact with food, food products or other food related material, such as packaging.
High Temperature Synthetic Lube 100
is formulated for uses where the lubricant is exposed to high temperatures for extended periods of time. It is especially suited for use as an oven chain and bearing lubricant. It is also used for many other high and low temperature applications requiring a fluid with properties extending beyond those available with conventional mineral oils. High Temperature Synthetic Lube 100 has excellent thermal stability and oxidation resistance. This product has excellent solvent properties resulting in its actually removing built up carbon and varnish deposits during its first few days of operation in a system that previously employed a conventional lubricant.
K-Draw 67 HF
is a food grade synthetic lubricant, designed for drawing, stamping, and forming operations. It is specially formulated for moderate to heavy-duty applications where very low residues are desired. It contains solvents, cleaners and solublizers to keep residues low and highly efficient boundary lubricants to prevent buildup of materials on the metals surfaces. K-Draw 67 HF is formulated with materials that meet US FDA requirements for incidental contact with food products and meets H-1 requirements. It is also designed for a wide range of application methods and can be applied by hand wiping, brushing, drip applicators, transfer pads, and various spraying methods.
is a H-1 food grade (NSF registered) evaporative stamping lubricant designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications. Another major benefit of K-Draw 165 is that it does not leave unwanted residues, which require extensive and expensive cleaning operations. You can use it to do the forming operation and proceed to subsequent operations or final use applications without a cleaning step. K-Draw 165 is an exceptional multi-purpose product, which is safe on all metals and most plastics. It can be dipped, rolled, sprayed, brushed, wiped or otherwise transferred prior to the operation. Application just prior to the operation is recommended. Its high flash point makes it much safer to use than many competitive products and it does not cause staining or discoloration.
is a unique, food grade lubricant, designed for light to moderate duty forming, stamping, and drawing operations. This product is a very low viscosity fluid which has exceptional wetting and cleaning ability, as well as lubricating properties. It finds use in a wide range of forming and stamping operations as well as some coining operations. A major benefit of K-Draw 205 is that it doesn’t leave unwanted residues which require extensive cleaning. Use it to do the forming operation and you are finished with it and can proceed to subsequent operations without the need for an added cleaning step.
is food grade stamping lubricant designed for light to heavy duty forming operations and light to moderate drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations, as well as some coining applications. It leaves a very good, short term rust preventative film on the part after the metal forming operation. K-Draw 260 leaves a low viscosity film that needs only a light cleaning operation to remove. In most cases, the residue is easily cleaned off with a light duty, water based cleaner or solvent degreaser. Please contact your Interlube representative for our recommendations for your application.
is a colorless, clear gel used in the coating of paint booths or other types of coat spraying applications. It is designed for use with all types of paints and coatings. Because of its clarity, it is ideal for use on lighting fixtures inside of paint booths. Petro White allows light to emanate from the fixture while preventing the fixture from becoming covered with paint.
Refrigeration Oil 68E
Interlube Corporation’s Refrigeration Oil 68E is formulated for use in refrigeration systems using hydrofluorocarbon compounds, such as R134a, R404a, R407c, R410a, R507, and R23.
Refrigeration Oil 155 and 300
are premium quality refrigeration oils specially refined from carefully selected base stocks to give long, trouble free service. They are designed to lubricate properly under the severe demands of refrigeration systems and have the chemical and thermal stability to assure years of uninterrupted service. They are compatible with, and essentially equal to, the oils originally used by the equipment manufacturers.
Silicone Lubricant II
is used to lubricant passenger coach windows and seat mechanisms, door hinges, drawers, locks, etc. Meets USDA H-1 requirements.
Super White 1910 FG-2
is a synthetic, multi-purpose, food grade grease, specially formulated for moderate to high temperature applications where water or steam may be present. It has outstanding water resistance, superior oxidation resistance and extremely high load carrying performance. This special food grade grease formulation, meets US FDA regulations for a H-1 type lubricant (21 CFR 178.3570). Its unique formulation gives it unsurpassed EP and anti-wear properties and exceptionally long service life. It has superior shear-stability and lubricating properties over all conventional greases. It also has an operating temperature range from – 30º F to +400º F and has exceptionally high EP performance and superior rust and oxidation resistance.
Synthetic Refrigeration Compressor Oils 150 and 300
are totally synthetic, food grade refrigeration fluids designed to replace mineral oil based refrigeration oils in compressors using ammonia, R-12, R-22 and R114. Because of their totally synthetic nature they have no wax content and no real flock point. They are specially designed for industrial and marine use and are more chemically and thermally stable than their mineral oil counterparts. This added stability means less sludge and acid formation, which is a significant advantage for these products.
White Cote 99X132B
White Cote 99X132B is a polymer structured, zinc-free, white food grade grease with outstanding load carrying ability and superior high temperature performance. Its unique combination of properties allows this one grease to meet nearly all of the total requirements of the food processing and pharmaceutical industries.
White Cote AW+1
products are food grade multi-purpose lubricants with exceptional oxidation stability. Their uses include today’s modern high pressure, high-speed hydraulic systems and many general-purpose lubricant applications. They are formulated with extra high levels of oxidation inhibitors, anti-wear agents, mild EP agents, and rust inhibitors which pass the Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these food grade lubricants is superior to most non-food grade lubricants on the market today. These oils have many applications other than as premium quality anti-wear hydraulic oils including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. White Cote AW+1 products are available in a wide variety of viscosity grades.
White Cote FM
greases are specially formulated, white food grade greases, designed to meet the requirements of the food processing and pharmaceutical industries. They are multi-purpose lubricants that meetUSDA Hl (lubricants for use with incidental food contact) requirements and comply with the FDA regulations, CFR Title 21, Paragraph 178.3570. All materials used in their manufacture are of the highest purity and are manufactured under strict and rigid control. White Cote FM food machinery greases are utilized in a very broad range of applications including conventional lubricating functions, as well as to serve as release and anti-rust agents and gasket & seal materials.
White Cote FM is a time proven multi purpose grease for the food processing industry. It has excellent rust, oxidation, and water resistance, and can be used for all operations with the exception of those calling for high EP or high temperature (greater than 225°F.) performance. It has excellent pumpability at low temperatures. White Cote FM is available in NLGI Grades 2, 1, and 0.
White Cote HTP
is a special polymer structured white food grade grease with outstanding load carrying ability and superior high temperature performance. Its unique combination of properties allows this one grease to meet nearly all of the total requirements of the food processing and pharmaceutical industries. White Cote HTP has a USDA H1 (lubricants for use with incidental food contact) rating and complies with the FDA regulations, CFR Title 21, Paragraph 178.3570. All materials used in its manufacture are of the highest purity and it is manufactured under strict and rigid control.
White Cote HTP is a heavy-duty performer with excellent rust, oxidation, and water resistance, and is specially formulated for high load carrying ability, tenacious adhesion, high temperature use, and wear reducing anti-wear performance. Its wide operating temperature range (0 – 400 o F) and high load carrying ability allow its use in nearly all applications. This exceptional multi-purpose food machinery grease finds use in a broad range of applications including the conventional lubricating grease functions as well as serving as a release agent, anti-rust agent, and gasket & seal material. White Cote HTP is available in NLGI 2, 1, 0, 00 and 000.
White Cote SAE 80W-90 and 90-140 Non Drip
are food grade multi- viscosity, multi-purpose polymer type EP gear lubricants, which can be used in nearly all gearbox applications in food plants. The two products cover the whole normal range of requirements for food grade gear lubricants, resulting in simplification of lubrication procedures and inventory reduction. These products contain polymers designed to improve the natural adhesive and cohesive properties of the lubricant and to give it a wide, multi-viscosity, operating range. The special polymers improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and aid in reducing leakage. In addition, they also contain a unique combination of additives, which gives outstanding anti-wear and EP type performance.
White Mineral Oils (5,7,9) NF
are extremely highly refined white oils, which meet FDA and USDA H-1 requirements for lubricants, which can be used in direct contact with food products. They meet US FDA regulations under 21 CFR 178.3620 for indirect use in food. Their very low toxicity and their complete inertness to most materials make them appropriate for an extremely wide range of uses. They all meet the NF requirements for drug applications. They are colorless, odorless, nearly tasteless, non-toxic, transparent fluids of varying viscosity and are composed of complex mixtures of hydrocarbons of extremely high purity.
White Mineral Oils (19,21,35) USP
are extremely highly refined white oils, which meet FDA and USDA H-1 requirements for lubricants, which can be used in direct contact with food products. They meet US FDA regulations under 21 CFR 178.3620 for indirect use in food. Their very low toxicity and their complete inertness to most materials make them appropriate for an extremely wide range of uses. They all meet the USP (United States Pharmacopoeia) requirements for drug applications. They are colorless, odorless, nearly tasteless, non-toxic, transparent fluids of varying viscosity and are composed of complex mixtures of hydrocarbons of extremely high purity.
Don’t see what you need? Contact us!