Bearing

Interlube Corporation manufactures a complete line of bearing lubricants. The high viscosity index of these lubricants allows them to maintain their viscosity at a wide range of temperatures. They also have the film strength necessary to support heavy loads. Interlube Corporation produces both oils and greases as well as solid film lubricants for use on bearings.

Here are a few of our products. We can custom design a product to meet your requirements. Please contact us for additional information or to place an order. Thank you for considering Interlube Corporation as your lubricant and cleaning compound vendor and partner.

Bio-Cinn NF 220

a multi-viscosity, multi-purpose, biodegradable lubricant, designed for heavy duty industrial applications.  Its inherently superior thermal and oxidation stability, coupled with outstanding anti-oxidants, EP, and anti-wear agents, far exceeds the capabilities of conventional lubricants.

Cinnfluid GB+1

products are multi-purpose, food grade lubricants, based on synthetic hydrocarbons, designed to give outstanding performance in heavy-duty industrial applications at very low and/or high temperatures. These products are especially designed for heavy-duty industrial applications involving high load conditions and extremely high operating temperatures. Their superior thermal and oxidation stabilities, coupled with outstanding anti-oxidants, far exceed the performance of conventional lubricants. Their naturally high viscosity indexes assure performance across a wide range of temperatures while their low inherent pour points assure performance at low temperatures unheard of with conventional petroleum lubricants. Cinnfluid GB +1 products maintain their performance benefits at conditions where most other products fail. They are available in many different viscosities grades to meet any need.

Endura Gear Lubes Non Drip

are multi-viscosity polymer gear lubricants, designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearboxes including worm gears. The automotive and heavy-duty trucking applications include high performance hypoid gears and limited slip differentials. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. They also contain special polymers to improve on the oil’s natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased downtime and improved performance. Endura Gear Lubes are available in all SAE gear lubricant grades.

Endura Moly Gear Lubes Non Drip

are multi viscosity – multi purpose polymer gear lubricants fortified with molybdenum disulfide (MoS2) and designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearbox applications including worm gears. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. The MoS2 is incorporated through a special process to produce an extremely stable suspension of the “moly” lubricating solids. The “moly” lubricating solids are of a sub-micron size that assures a stable suspension and eliminates concerns over removal by settling or filtration. They also contain special polymers to improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased down time and outstanding performance. They are available in all SAE and AGMA gear lubricant grades.

FG 1200 Synthetic Oven Chain & Bearing Lubricant

designed for use in high temperature ovens where a USDA H-1 lubricant is wanted or needed (acceptable for incidental food contact). It can be used in applications up to 240°C or 465°F.  It offers excellent anti-wear performance and oxidation resistance.

High Temperature Synthetic Lube 100

is formulated for uses where the lubricant is exposed to high temperatures for extended periods of time. It is especially suited for use as an oven chain and bearing lubricant. It is also used for many other high and low temperature applications requiring a fluid with properties extending beyond those available with conventional mineral oils. High Temperature Synthetic Lube 100 has excellent thermal stability and oxidation resistance. This product has excellent solvent properties resulting in its actually removing built up carbon and varnish deposits during its first few days of operation in a system that previously employed a conventional lubricant.

Journal Guard 1200 & 2400

designed for use where a fluid lubricant is required for plain journal bearings in railroad car journal boxes and traction motor suspension bearings on railroad locomotives.

Red Multi Purpose Gear Lubes Non Drip

are made with highly refined, high viscosity index oils, for enclosed gears combining all modern chemical and lubrication know how. These products contain a multifunctional dual polymer system to improve adhesive and cohesive properties of the lubricant that results in unexcelled wear reduction and shock load protection. The non-drip function affords total lubrication by keeping gear teeth coated with oil through the entire cycle, including the top of the gear housing, which substantially reduces friction and heat. Because the gears are enclosed and out of sight they generally get attention only when a problem occurs. Over heating and seizing are the common indicators of stress, strain, pressure or metal fatigue. The use of Red Multi Purpose Gear Lube Non Drip can result in reduced lubricant usage, longer gear life, less down time, increased production, greater efficiency and reduced costs. These gear lubricants are available in all SAE gear lubricant grades.

Red Spray Grease II

A special penetrating formula that sprays as a liquid to flush off old contaminated lubricant, creep deeply into working parts and then set up to a viscous, thick grease.

Synthetic Oven Chain & Bearing Lubricant II

is designed for uses where the lubricant is exposed to high temperatures for long periods of time. Under such conditions, conventional mineral oils and greases and some synthetic lubricants evaporate rapidly, decompose, or oxidize severely. Synthetic Chain & Bearing Lubricant II has excellent thermal stability, oxidation resistance, and extremely low volatility.

White Cote AW+1

products are food grade multi-purpose lubricants with exceptional oxidation stability. Their uses include today’s modern high pressure, high-speed hydraulic systems and many general-purpose lubricant applications. They are formulated with extra high levels of oxidation inhibitors, anti-wear agents, mild EP agents, and rust inhibitors which pass the Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these food grade lubricants is superior to most non-food grade lubricants on the market today. These oils have many applications other than as premium quality anti-wear hydraulic oils including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. White Cote AW+1 products are available in a wide variety of viscosity grades.

White Cote SAE 80W-90 and 90-140 Non Drip

are food grade multi- viscosity, multi-purpose polymer type EP gear lubricants, which can be used in nearly all gearbox applications in food plants. The two products cover the whole normal range of requirements for food grade gear lubricants, resulting in simplification of lubrication procedures and inventory reduction. These products contain polymers designed to improve the natural adhesive and cohesive properties of the lubricant and to give it a wide, multi-viscosity, operating range. The special polymers improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and aid in reducing leakage. In addition, they also contain a unique combination of additives, which gives outstanding anti-wear and EP type performance.

Don’t see what you need? Contact us!