Printing & Graphics
Interlube Corporation has supplied the Printing and Graphics industry for many years. We manufacture an extensive line of oils and greases, and both water-based and solvent-based cleaners. Many of our aerosol products also find use in these industries.
Here is a list of some of our products. Please contact us with any questions, so we can supply you with the best products for your applications.
Here is a list of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
A 502 Grease
A502 Grease is a heavy-duty, multi-purpose grease, proven to be outstanding for chassis and bearing lubrication. It is fortified with extreme pressure agents to provide protection even when the best conventional lubricants fail quickly. The extreme pressure agents protect the bearing from scoring and destructive wear under the highest loading conditions. A502 Grease is a NLGI #2 grease. It is also available as a NLGI #1 (A501 Grease), a NLGI 0 (A500 Grease), a NLGI 00 (A5000 Grease) and a NLGI 000 (A50000 Grease).
Blue Tacky 803 Grease
is a premium, heavy duty, multi-purpose lithium complex grease specially designed for both low and high temperature performance. This high melting point grease is enhanced with special additives to give it very high film strength, anti-wear and EP performance. It incorporates premium quality, high flash point oils and combines them with special polymers to give it greater staying power than conventional greases. It has a blue colored smooth tacky appearance that readily identifies it from normal automotive grease products. This combination also makes it very resistant to water and gives it that special adherence to metallic surfaces.
Endura Gear Lubes Non Drip
are multi-viscosity polymer gear lubricants, designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearboxes including worm gears. The automotive and heavy-duty trucking applications include high performance hypoid gears and limited slip differentials. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. They also contain special polymers to improve on the oil’s natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased downtime and improved performance. Endura Gear Lubes are available in all SAE gear lubricant grades.
Endura Moly Gear Lubes Non Drip
are multi viscosity – multi purpose polymer gear lubricants fortified with molybdenum disulfide (MoS2) and designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearbox applications including worm gears. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. The MoS2 is incorporated through a special process to produce an extremely stable suspension of the “moly” lubricating solids. The “moly” lubricating solids are of a sub-micron size that assures a stable suspension and eliminates concerns over removal by settling or filtration. They also contain special polymers to improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased down time and outstanding performance. They are available in all SAE and AGMA gear lubricant grades.
Endura Polymer Grease HD 252
is a premium, very heavy duty, EP containing, multi-purpose grease designed for industrial, off road, mining, construction, farm and transportation applications. It meets tough NLGI certification tests for multi-purpose greases and is extremely water resistant and adhesive. It is formulated with a premium performance package of high film strength agents, extreme pressure agents and anti-wear agents to give it superior load carrying and protective properties. The polymers incorporated in the formula increase the adhesiveness and shock load carrying abilities of the grease. Its own unique combination of additives and premium quality base stocks make it a truly heavy-duty multi-purpose lubricant. It is a NLGI #2 grease and is available also as a #1 (251) and 0 (250).
Foaming Chain & Cable Lubricant III
is an aerosol product. It is a rust protective, extreme pressure lubricant that penetrates to the core of the cable and chain.
Interlube’s Formula 017 is designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications.
is a high purity, general purpose solvent degreaser with relatively high flash point (>140°F), which allows it to be used more safely than other lower flash solvents. This high flash point also makes for easier disposal of the spent solvent. In many cases, a licensed used oil reclaimer can recycle it (check with your federal, state, and local authorities). It is an excellent parts washer and degreaser as well as a general-purpose solvent. It loosens grease, oil, dirt, grime and sludge allowing for easy removal and cleanup.
is a multi-purpose cleaner/degreaser that can be used in a wide variety of applications. It has excellent solvency and wetting properties that allow it to penetrate and displace the soil being removed. It quickly removes grease, dirt and grime. Formula 063 is an excellent ink solvent for removal of many types of inks and oil soluble dyes. It evaporates fairly rapidly for quick drying of the part being cleaned.
is a special solvent blend specifically designed for the cleaning of inks and dyes. Its formulation makes it an exceptional cleaner for the removal of most inks, dyes, etc. It has excellent solvency and extremely low surface tension, allowing Formula 81X18B to wet and penetrate the ink and make it easy to remove. It is a flammable solvent-based cleaner, so please USE CAUTION and follow all label instructions.
Formula 99X124A Barrier Coating
a wax emulsion that provides water and block resistance in paint and coating formulations, and imparts water repellency on wood and other products.
Formula 2600 Multi-Purpose Cleaner
is a synthetic concentrate that cuts your inventory because it replaces all your special cleaners. It is easy and economical to use because you add and adjust the water level depending on the soil load. Formula 2600 quickly penetrates dirt, grease, grime, etc., and holds it in suspension for easy removal. It cleans everything from floors to greasy plant machinery. It is excellent for steam cleaning and safe on painted surfaces when diluted as directed. It can be applied by steam cleaner, spraying, brushing, mopping, or wiping. Rinse with water or wipe clean with damp cloth. On heavier soil, allow solution to soak and penetrate, but not to dry before rinsing or wiping clean.
Four Way Action II
An all purpose, non-flammable, non-conductive mechanic’s spray. Penetrates through rust and corrosion to loosen frozen nuts and bolts. Displaces moisture in wet electrical systems. Leaves treated surfaces protected with residual anti-corrosive film.
Gear Lube 2600 ND
is a very heavy-duty, non-asphaltic, special resin based, EP open gear lube. It is a very viscous formulation that is not thinned down with solvents. It deposits a tenacious flexible-fluid film on open gears that resists runoff, wash off, corrosion, displacement, and throw off, even at high speeds. The non-asphaltic base makes it much safer than the typical open gear lubes based on asphalts and tars. The special base also does not dry out and “crack” like many of the tar and asphalt based products. It is very water resistant, has EP performance, and is self-healing if scratched or cut while using. It is designed for temperatures up to approximately 240ºF.
HT Chain Lube 41-S
is a special solvent-based chain lubricant that contains a unique synthetic additive. It is performs extremely well on most chains and is formulated to handle high temperatures. The solvent allows the synthetic additive to penetrate every part of the chain; then the solvent evaporates leaving an excellent high temperature performance film.
Interlube’s Nova (ISO) A Oils are premium quality anti-wear, anti-foam, rust and oxidation inhibited hydraulic oils, which meet the requirements of all major hydraulic equipment manufacturers. They were developed for use in modern high pressure, high speed hydraulic systems to insure maximum pump wear protection, and to prolong the systems life.
is a colorless, clear gel used in the coating of paint booths or other types of coat spraying applications. It is designed for use with all types of paints and coatings. Because of its clarity, it is ideal for use on lighting fixtures inside of paint booths. Petro White allows light to emanate from the fixture while preventing the fixture from becoming covered with paint.
Red Spray Grease II
A special penetrating formula that sprays as a liquid to flush off old contaminated lubricant, creep deeply into working parts and then set up to a viscous, thick grease.
Don’t see what you need? Contact us!