Product Categories
- Railroad Lubricants
- Food Grade
- Air Tool Oils
- Compressor Oils
- Gear Lubes
- Hydraulic Oils
- Chain Lubes
- Heat Transfer Fluids
- Vacuum Pump Oils
- Grease
- Turbine Oil
- Pneumatic
- Metalworking Fluids
- Aerosol
- Bearing Lubricants
- Industrial Cleaners
- Refrigeration Oils
- Release Agents
- Rust Preventatives
- Wire Rope Lubricants
- Other Lubricants
- Lubrication Accessories
Products
Here are a few of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
Formula 063
is a multi-purpose cleaner/degreaser that can be used in a wide variety of applications. It has excellent solvency and wetting properties that allow it to penetrate and displace the soil being removed. It quickly removes grease, dirt and grime. Formula 063 is an excellent ink solvent for removal of many types of inks and oil soluble dyes. It evaporates fairly rapidly for quick drying of the part being cleaned.
Formula 63 X 74N Graphite Chain Lube
is a water-based lubricant specially designed for lubrication of high temperature oven chains such as those used in bakery ovens, paint curing ovens and other similar applications. It has no flash point, essentially eliminating any fire hazard. It can be applied to the chain at higher temperatures than kerosene-based lubricants or solvent-based lubricants, without severe smoke generation or fire generation concerns. Also beneficial is that the volatile material is not a hazardous solvent but merely water. The high level of graphite used in this product is a super premium synthetic grade with a very fine particle size. This greatly reduces the specific wear rates, under high load conditions, which are associated with lesser grades of graphite. Additional benefits are also achieved in the added ability of the graphite to remain in suspension and to penetrate to all load bearing surfaces of the chain.
Formula 81X18B
is a special solvent blend specifically designed for the cleaning of inks and dyes. Its formulation makes it an exceptional cleaner for the removal of most inks, dyes, etc. It has excellent solvency and extremely low surface tension, allowing Formula 81X18B to wet and penetrate the ink and make it easy to remove. It is a flammable solvent-based cleaner, so please USE CAUTION and follow all label instructions.
Formula 99X124A Barrier Coating
a wax emulsion that provides water and block resistance in paint and coating formulations, and imparts water repellency on wood and other products.
Formula 101X24C Heavy Duty Hammer and Chisel Paste
Heavy Duty Hammer and Chisel Paste is a specially formulated grease for hydraulic hammers and other impact tools that require protection from shock loads. It is a high temperature and extreme pressure grease, fortified with copper and graphite that forms a protective film that reduces wear of contact surfaces.
Formula 101X32D Pale Oil
The Interlube series of Pale Oils are formulated for a wide range of applications. These include insulating oils, metalworking fluids, anticorrosion fluids, rubber compounding, resin extenders, and plasticizers.
Formula 1103M Metal Safe Cleaner
is a low foam, multi purpose, powder cleaner for use in food processing and industrial plants that require a thorough cleaning yet metal safe product. It is mild to use, but highly effective in removing a broad range of difficult to remove soils, and gives rapid wetting, direct penetration and good emulsifying power on greasy and oily soils. Formula 1103M dissolves readily and contains no insoluble matter, and therefore, rinses easily and completely leaving no residue. It contains materials to hold hard water salts in solution and prevent buildup of scale on heating coils and tubes. Formula 1103M is not just safe on metals, it is non-corrosive, non-toxic, biodegradable and non-hazardous. It contains no caustics, chromates, nitrites, glycol ethers, phenols or other hazardous chemicals. It can be boiled without giving off irritating fumes. It meets USDA A2 as “a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices.”
Formula 1375 Heavy Duty Alkaline Cleaner
is a powder cleaner designed to remove heavy, baked on soils, carbonized deposits and other tough to remove residues in food, drug and beverage manufacturing and processing plants. Formula 1375 meets USDA A2, meaning it is “acceptable for use on in soak tanks or with steam or mechanical cleaning devices.” It is extremely effective on proteinacious soils and their residues. Formula 1375 is safe on iron, steel and stainless steel. It should not be used on aluminum, copper, brass, galvanized, tin or zinc.
Formula 1503 Concrete Floor Cleaner
is a granular, dustless powder cleaner for removal of grease and heavy soil build-up on unpainted concrete floors, waste cans, storage areas, grease pits, loading docks, engine rooms, locker rooms, hangers, garages, driveways, parking lots, etc. It converts the oil and grease into a soluble state, emulsifies them, and lifts them off the surface so they can be easily rinsed away. It is formulated with special wetting agents in high concentrations that speed the cleaning process, so that no laborious scraping, scrubbing, or lengthy soaking is needed. Formula 1503 quickly enters cracks and surface irregularities to extract the soil. It will neither pit nor damage surfaces.
Formula 1605 Vehicle Cleaner
is designed for use in both automatic and manual systems for exterior washing of passenger cars, trucks, buses, railcars, subway cars, etc. Formula 1605 is a mild alkaline powder with outstanding cleaning and rinsing properties. It is formulated for rapid penetration and emulsification of all types of soils and includes special rinse aid-wetting agents to assure a complete non-streaking rinse.