Products

Bestcut 762

is a very heavy-duty type, multi-purpose cutting oil, specally suited for high speed, high production gun drilling and trepanning applications. It utilizes some of the latest developments in surface chemistry to make a product that outperforms even the best conventional high EP and fatty type oils. It is a combination of a whole group of high performance chemical EP agents, rust and corrosion inhibitors, friction reducing agents and anti-wear materials. The fluid’s viscosity is balanced to reduce misting and supply a high rate of chip removal, along with a heat transfer rate that is well suited for the use of carbide tooling. Bestcut 762 is formulated to handle the toughest stainless steels, high nickel alloys and other alloys in gun drilling and trepanning operations. Because of its special properties, it is also well suited for many other tough cutting, turning, drilling and milling operations.

Best Tap 2400 EP

is an extreme pressure lubricant designed specifically for general purpose tapping operations. It contains high levels of extreme pressure additives as well as boundary lubricant additives and anti-corrosion ingredients. Its very high viscosity gives Best Tap 2400 EP adequate body for all tapping operations insuring adherence to the tap throughout the entire tapping operation. It is used as received and applied by hand.

Bio-Cinn NF 220

a multi-viscosity, multi-purpose, biodegradable lubricant, designed for heavy duty industrial applications.  Its inherently superior thermal and oxidation stability, coupled with outstanding anti-oxidants, EP, and anti-wear agents, far exceeds the capabilities of conventional lubricants.

Endura Polymer BT-22X Grease

Interlube Endura Polymer BT-22X Greases are premium, heavy-duty, multi-purpose lithium complex greases specially designed for both low and high temperature performance.  These high melting point grease are enhanced with special additives to give them very high film strength, anti-wear and EP performance.  They incorporate premium quality high flash point oils and combines them with special polymers to impart greater staying power than conventional greases.  The blue-colored smooth tacky appearance readily identifies them from normal automotive grease products. This combination also makes them very resistant to water and helps it to adhere to most metallic surfaces.

They are available in NLGI grades 0 (220), 1 (221), and 2 (222).

Booth Coatings

Interlube Corporation offers a variety of paint booth coatings designed for use with all types of paints and coatings.

Chain Lube 250 MHT

Interlube’s Chain Lube 250 MHT is a Premium, High Temperature Chain Lube containing Molybdenum Disulfide, allowing it to penetrate into chain pins and provide heavy-duty protection. ChainLube 250 MHT is designed especially for high temperature oven conveyor chains that operate at temperatures up to 600° F.   It is formulated with a light consistency, for ease of application and to perform as a cleaning-penetrating fluid that aids its penetration into the pin and bushing area of the chain, where it is actually needed. As its unique dual-purpose carrier fluid evaporates, it turns into a concentrated high-temperature performing chain lube with the solid film Molybdenum Disulfide that protects the chain and greatly extends its useful life.

In addition to high temperature oven chains, it is also used for Bearing lubrication, Slides, Fire Arms, Assembly Fluid, Cable and Wire Rope Lube.  It is also used for many other high and low temperature applications requiring a fluid with properties extending beyond those available in conventional fluids.  It has excellent thermal stability and oxidation resistance and does not deposit sticky or plugging residues.

Chain Saw Bar Oil 136 W

is a specially formulated chain saw lubricant designed to extend the life of the bar, chain and sprocket on chain saws. The EP, polymer and other additives in this lubricant give it excellent wetting characteristics allowing it to reach all areas that need lubrication and reduces the wear on all parts of the saw. Its tackiness helps it to adhere to the chain at high speeds encountered while in operation.

Cinn-Bio Rail Curve Grease L – 100

Interlube’s CINN-BIO Rail Curve Grease L-100 is a biodegradable, eco-friendly, rail curve grease made with a biodegradable vegetable oil, a lithium soap thickener and a high level of high purity synthetic graphite.  It contains no hazardous chemicals or chemicals containing volatile organic compounds (VOC).  This unique formulation contains additives to enhance the load carrying ability of its biodegradable base fluid’s boundary lubricant properties.  It contains a high level of synthetic graphite to provide added lubricity from graphite’s superior load carrying capabilities.  It’s combination of fluid and solid boundary and EP lubricants allows for excellent load carrying capability and wear protection.

It is an NLGI 0 grade designed for easy pumping and carry down the tracks.  CINN-BIO Rail Curve Grease L-100 remains pliable over a wide temperature range and does not become brittle even under wet, dusty, frigid, dirty, hot, gritty and abrasive conditions.  It contains no solvents and provides both low wear and long life.  It is also available as an NLGI 00 Grade for those users in very cold climates who prefer a thinner grease for winter pumping.

Cinncom SHC 32, 46, 68 & 100

are premium quality, synthetic hydrocarbon based, compressor fluids designed to give outstanding performance in oil flooded rotary vane and rotary screw compressors. They have exceptional thermal and oxidation stability that results in minimizing the formation of varnish, lacquer, and sludge deposits. Their high VI and low pour points are inherent “Molecular Advantages” of these completely synthetic products. The outstanding properties of these products result in significantly longer lubricant life (extended drain intervals), longer equipment life (reduced wear), reduced downtime (increased production time), improved safety and lower maintenance costs. All of these add up to lower overall costs in your business. Other viscosity grades are available.

CINNFLUID AW+1 Synthetic Fluids

Interlube’s CINNFLUID AW+1 Synthetic Fluids are multi-purpose synthetic food grade lubricants specially formulated with very high levels of antioxidants to meet the most demanding requirements of the food processing and pharmaceutical industries.  They are suitable for a wide range of general-purpose applications including today’s modern high pressure, high speed hydraulic systems.  They are formulated with a unique combination of anti-wear agents, mild EP agents, rust inhibitors, and oxidation inhibitors which pass the tough Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these synthetic food grade lubricants is superior to most non-food grade lubricants on the market today.  These synthetic lubricants are used in many applications including those calling for non-detergent oils, bearing lubricants, non-EP type gear lubricants, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants.

CINNFLUID AW+1 Synthetic Fluids are available in 4 ISO grades from an ISO 32 to ISO 150.   They are all NSF H1 and are suitable for food machinery applications where there is possibility of incidental contact with food or its packaging materials.